Blind Fange-manufacture,factory,supplier from China

PN10 refers to the pressure rating of the flange, which is 10 bar. DN400 refers to the nominal size of the pipe that the blind flange fits on, which is 400mm. A blind flange is a type of flange that is used to seal the end of a pipe or valve.

The flange blind plate plays the role of isolation and cutting off, and the role of the head and the tube cap is the same. Due to its good sealing performance, it is generally used as a reliable means of isolation for systems requiring complete isolation. A blind plate is a solid circle with a handle used in normally isolated systems. The figure 8 blind plate, shaped like figure 8, has a blind plate at one end and a throttling ring at the other end, but the diameter is the same as the pipe diameter of the pipeline, so it does not play a throttling role.

The PN10 DN300 Blind flange is a kind of flange that is used to shut off or seal the quit of a pipeline.

In industrial settings, blind flanges find extensive use in pipelines, pressure vessels, and plumbing systems. These flanges are an integral part of oil and gas refineries,chemical plants, and power generation facilities, as well as other industries such as water treatment and food processing. Their ability to seal off pipe ends prevents leaks, enhances safety, and ensures the efficient functioning of the overall system.Adhering to the Russian standard, PN16DN300 blind flanges follow specific dimensions and guidelines outlined by the national regulatory body.

A PN25 blind flange with DN600 size would have the following specifications:PN25 refers to the pressure rating of the flange, which in this case is 25 bar.DN600 refers to the nominal diameter of the flange, which is 600mm.Blind flange means that it is a solid disk that is used to block off a pipeline or to create a stoppage at the end of a pipeline.The flange would be made of a suitable material such as carbon steel or stainless steel, depending on the application and the fluid being transported.

The PN10 DN200 designation refers to the pressure rating (PN10) and the nominal diameter (DN200) of the blind flange. PN10 signifies the maximum pressure the flange can withstand, which, in this case, amounts to 10 bars or approximately 145 psi. This rating makes it suitable for a range of medium-pressure applications.

A PN10 blind flange with DN600 size would typically have the following specifications:PN10 refers to the pressure rating of the flange, which in this case is 10 bar.DN600 refers to the nominal diameter of the flange, which is 600mm.Blind flange means that it is a solid disk that is used to block off a pipeline or to create a stoppage at the end of a pipeline.The flange would be made of a suitable material such as carbon steel or stainless steel, depending on the application and the fluid being transported.

PN16 refers to the pressure rating of the flange, which is 16 bar. DN300 refers to the nominal diameter of the flange, which is 300 millimeters. Blind flanges are used to seal off the end of a piping system.

Our CompanyJin Runyuan flange of Shandong Machinery CO., LTD is located in the famous "township of the blacksmith"-Shandong Jinan chapter grave area set street agency headquarters, where convenient transportation beautiful environment. Company was founded in 2001, covers an area of 20000 square meters, is a professional manufacturer of forging flange company, main products: Japanese standard, American standard, German standard, the standard also can according to customers drawings or samples processing.

All in the two planes in the periphery of the use of bolt connection at the equal time closed connection parts, oftentimes regarded as "flange", such as the connection of air waft pipe, this kind of elements can be regarded as "flange class parts".But this connection is totally a section of the equipment, such as the connection of the flange and the water pump, it is now now not right to identify the water pump "flange parts".

All in the two planes in the periphery of the use of bolt connection at the equal time closed connection parts, often regarded as "flange", such as the connection of air go with the flow pipe, this sort of elements can be known as "flange category parts".But this connection is entirely a segment of the equipment, such as the connection of the flange and the water pump, it is now now not correct to identify the water pump "flange parts".

Our CompanyJin Runyuan flange of Shandong Machinery CO., LTD is located in the famous "township of the blacksmith"-Shandong Jinan chapter grave area set street agency headquarters, where convenient transportation beautiful environment. Company was founded in 2001, covers an area of 20000 square meters, is a professional manufacturer of forging flange company, main products: Japanese standard, American standard, German standard, the standard also can according to customers drawings or samples processing.

Our CompanyJin Runyuan flange of Shandong Machinery CO., LTD is located in the famous "township of the blacksmith"-Shandong Jinan chapter grave area set street agency headquarters, where convenient transportation beautiful environment. Company was founded in 2001, covers an area of 20000 square meters, is a professional manufacturer of forging flange company, main products: Japanese standard, American standard, German standard, the standard also can according to customers drawings or samples processing.

"flange class parts".But this connection is entirely a section of the equipment, such as the connection of the flange and the water pump, it is now now not correct to title the water pump "flange parts". Relatively small, such as valves, can be recognized as "flange parts". Flange connection is an essential connection mode in pipeline construction.

Our CompanyJin Runyuan Flange of Shandong Machinery Co., Ltd is located in the renowned "township of the blacksmith" in Shandong Jinan chapter grave area set street agency headquarters, offering a convenient transportation network and a beautiful environment. Our company was established in 2001 and occupies an area of 20,000 square meters. As a professional manufacturer of forging flanges, our main products include Japanese, American, and German standard flanges.

Our CompanyJin Runyuan flange of Shandong Machinery CO., LTD is located in the famous "township of the blacksmith"-Shandong Jinan chapter grave area set street agency headquarters, where convenient transportation beautiful environment. Company was founded in 2001, covers an area of 20000 square meters, is a professional manufacturer of forging flange company, main products: Japanese standard, American standard, German standard, the standard also can according to customers drawings or samples processing.

The manufacturing engineering method of a PN40 DN200 butt welding flange normally entails the following steps:Raw cloth selection: The flange is typically made of magnificent substances such as carbon steel, stainless steel, or alloy steel.

PN10 DN600 WeldNeck Flanges have several advantages and characteristics.Pressure Rating:Advantages of PN10 DN600 WeldNeck Flanges:High Pressure Resistance: PN10 rating implies that these flanges can withstand a maximum operating pressure of 10 bar, making them suitable for high-pressure applications.Increased Safety: WeldNeck flanges have a long tapered hub that provides excellent reinforcement and reduces the risk of leakage or failure under high-pressure conditions.Improved Fluid Flow: The smooth transition from the flange to the pipe reduces turbulence and pressure drop, ensuring efficient

The Russian standard flange is a flange that meets the Russian national standard (also known as GOST). It is widely used in Russia and other countries of the former Soviet Union, with a unique bolt hole pattern and thickness, slightly different from other flange standards such as ANSI or DIN.

The American standard flanges are manufactured using different materials, and carbon steel flanges are one of the popular choices. Carbon steel is known for its strength and resilience, making it an ideal material for flanges that require high-pressure and high-temperature resistance. These flanges can withstand extreme conditions and maintain their structural integrity over a long period.The American standard flange, regardless of the material used, undergoes rigorous testing and quality control measures during the manufacturing process.

Significant advantage of yellow zinc plated flanges is their compatibility with Russian standard flanges. The Russian standard is widely recognized for its high-quality products and stringent manufacturing standards. When using carbon steel flanges that adhere to this standard, it is crucial to have a compatible flange that meets all the requirements.

Our CompanyIt seems like Jin Runyuan flange of Shandong Machinery CO., LTD is a well-established company specializing in the manufacturing of forging flanges. Here are some key points about the company:- It is located in Jinan, Shandong, which is known as the "township of the blacksmith." The area has convenient transportation and a beautiful environment.- The company was founded in 2001 and covers an area of 20,000 square meters.- They produce flanges according to Japanese, American, and German standards.

DNdBDD1D2hbdNumber  of holesaWeight kg151980554021011420.33202690655021211420.532533100756021211420.643239120907021314421.0140461301008031314431.2150591401109031314431.33657816013010531514431.63809118515012831518432.4410011020517014831518432.8512513523520017831718833.8815016126022520231718834.3920022231528025831918835.89250273370335312320181237.673003254353953654202212410.283503774854454154222212412.584004265354954654242216415.25005306406005704252220419.726006307557058705252620526.247007208608107755272624536.688008209759208805273024546.14900920107510209805293024555.11000102011751120108053

Weld neck flanges are a crucial component in piping systems, providing a secure and leak-proof connection between pipes. Among the various types of flanges available, carbon steel flanges are widely used due to their excellent durability and strength.