PN10 DN50 Flat plate Flange-manufacture,factory,supplier from China

PN10 DN50 flat flange is a flange used in piping systems.  PN10 refers to the pressure rating of the flange, which means that it can withstand a maximum pressure of 10 bar or 145 psi.  DN50 indicates the nominal diameter or size of the pipe that the flange will use, which is 50mm.  A in place.

When it comes to installation, flat plate flange offers ease and convenience. Its flat design allows for straightforward alignment and bolting, simplifying the assembly process.

PN10 DN200 Flat Plate Flange refers to a type of flange that has a flat surface and is designed to connect pipes with a diameter of 200 mm in a PN10 (pressure rating of 10 bar) piping system. This type of flange is commonly used in water supply, chemical, and industrial applications. It is often made of stainless steel or carbon steel and can come in various shapes, including round, square, and rectangular.

PN10 refers to the pressure rating of the flange, which is 10 bars. DN50 refers to the nominal diameter of the flange, which is 50 millimeters.

A PN10 DN50 flat flange is a type of flange that has a flat surface and is designed to fit pipes with a nominal diameter (DN) of 50 mm. The PN10 rating means that the flange can withstand a maximum pressure of 10 bar (145 psi) at specific operating temperatures and fluid types. These flanges are typically made of materials such as carbon steel, stainless steel, or aluminum and are commonly used in piping systems for water, gas, and steam applications.

PN10 DN50 Slip-On FlangeOur CompanyJin Runyuan flange of Shandong Machinery CO., LTD is located in the famous "township of the blacksmith"-Shandong Jinan chapter grave area set street agency headquarters, where convenient transportation beautiful environment. Company was founded in 2001, covers an area of 20000 square meters, is a professional manufacturer of forging flange company, main products: Japanese standard, American standard, German standard, the standard also can according to customers drawings or samples processing.

The flange blind plate plays the role of isolation and cutting off, and the role of the head and the tube cap is the same. Due to its good sealing performance, it is generally used as a reliable means of isolation for systems requiring complete isolation. A blind plate is a solid circle with a handle used in normally isolated systems. The figure 8 blind plate, shaped like figure 8, has a blind plate at one end and a throttling ring at the other end, but the diameter is the same as the pipe diameter of the pipeline, so it does not play a throttling role.

The flat design of the PN10 DN200 Flat Flangeensures a tight seal between two connected components. This flange type is commonly used in applications that require easy alignment and assembly, providing a seamless connection without any protruding parts.

A flat flange is a crucial component in various industrial applications, facilitating the connection between pipes, valves, and other equipment. Among the wide array of flat flanges available in the market, the PN25 DN600 flat plate flange stands out as a high-quality option.

The PN25 DN50 Russian Standard Flange, made of carbon steel, is a high-quality flat flange that has gained recognition for its durability and reliability. Russian standard flanges are widely used in various industrial applications due to their exceptional performance and adherence to strict engineering standards.One of the key features of the PN25 DN50 Russian Standard Flange is its high pressure rating of PN25.

The manufacturing procedure of a PN6 DN50 sliding flange commonly includes the following steps:Material selection: The flange is generally made from extraordinary substances such as stainless steel, carbon steel, or alloy metal that have excessive tensile electricity and resistance to corrosion.Cutting the material: The chosen fabric is reduce to the required dimension and structure the use of a reducing machine.Forming the flange: The reduce&nbs

The flat flange design offers several benefits. First and foremost, it provides a flat surface for the pipe or equipment to be connected, ensuring a tight seal. The flat surface allows for easy bolt alignment, simplifying the installation process for plumbers and engineers.

The production process of a PN6 DN50 sliding flange typically involves the following steps:Material selection: The flange is usually made from high-quality materials such as stainless steel, carbon steel, or alloy steel that have high tensile strength and resistance to corrosion.Cutting the material: The selected material is cut to the required size and shape using a cutting machine.Forming the flange: The cut material is pressed into the shape of a flange using a hot forging process.

PN10 refers to the pressure rating for the flange, which is 10 bar (145 psi). DN80 refers to the nominal diameter of the pipe that the flange is designed to connect to, which is 80 mm (approximately 3 inches).

PN10 refers to the pressure rating of the flange, which means it can withstand up to 10 bar of pressure. DN1400 refers to the size of the flange, which has a nominal diameter of 1400 mm (or approximately 55 inches).

PN10 refers to the pressure rating of a pipe or fitting, indicating that it can withstand a maximum pressure of 10 bar. DN300 refers to the nominal diameter of the pipe or fitting, which is 300 millimeters.

Our CompanyJin Runyuan flange of Shandong Machinery CO., LTD is located in the famous "township of the blacksmith"-Shandong Jinan chapter grave area set street agency headquarters, where convenient transportation beautiful environment. Company was founded in 2001, covers an area of 20000 square meters, is a professional manufacturer of forging flange company, main products: Japanese standard, American standard, German standard, the standard also can according to customers drawings or samples processing.

All in the two planes in the periphery of the use of bolt connection at the equal time closed connection parts, often regarded as "flange", such as the connection of air go with the flow pipe, this sort of elements can be known as "flange category parts".But this connection is entirely a segment of the equipment, such as the connection of the flange and the water pump, it is now now not correct to identify the water pump "flange parts".

Our CompanyJin Runyuan Flange, a company under Shandong Machinery CO., LTD, is located in the renowned "township of the blacksmith" in Shandong Jinan chapter grave area. The company's headquarters is situated on Set Street, offering convenient transportation and a beautiful environment.Established in 2001, Jin Runyuan Flange is a professional manufacturer specializing in the production of forging flanges. The company occupies an expansive area of 20,000 square meters.

A 10K 20A black coated board can have several advantages and functions depending on its specific application.

Flat welding flange in the process of use can save space, can reduce weight, it is important to ensure that the head position does not leak, has a very outstanding sealing function, the compact flange size is reduced because of the reduction of the diameter of the seal, which will reduce the section of the sealing surface.

The production process of a 5K 50A flat flange typically involves several steps:Material selection: The flange is typically made from a durable and corrosion-resistant material such as carbon steel (ASTM A105), stainless steel, or alloy steel. The choice of material depends on the specific application and the required properties of the flange.Cutting and shaping: The raw material is cut into the desired shape using cutting tools or by machining processes such as milling or turning.

Advantages of PN16 DN250 Flat Flange:Versatility: PN16 DN250 flat flange is like minded with a range of pipes, fittings, and equipment, making it a versatile preference in more than a few industries.Easy installation: The flat flange format permits for effortless set up and removal, decreasing downtime and labor costs.Pressure rating: PN16 (16 bar) suggests the most strain the flange can withstand, making it appropriate for purposes that require average stress&

PN16 DN150 flat flange typically refers to a standard size flange used for pipes with a diameter of 150mm and designed to be used in applications with a pressure rating of 16 bar. It has a flat sealing surface and is typically bolted to other flanges using bolts and nuts.